Window tinting enhances the aesthetics of a car and keeps it cool inside. Tinted car windows protect you from harsh sun rays and prevent cracks and warping in your vehicle interior to maintain your automobile looking newer longer. Also, window tinting protects windshield glare to lower eye fatigue from direct sun rays and flashy headlights at night.
Also, window tints ensure the durability of your car window. The thin layers protect not you’re your privacy but also your car. However, window tints need replacement due to some reasons – either you want to switch to different types of window tints, or it has just degraded over time. Discoloration and bubbles are the two most prominent symptoms you can spot in your car window tint as a sign that you will need a replacement. Experts are the ones who can fully replace your window tints. However, if you cannot wait for the schedule to remove the old stains for your car window, you can remove them yourself. With that, you will need to remove the window tints to install a new one.
For you to easily remove your old car window tints, this article will provide a how-to guide in removing your old window tints. In removing your old stains, you will need the razor blades, dishwashing soap, soft cloth, spray bottle, water, and glass cleaner.
Once you have already prepared the necessary materials to remove the old tints, you may now proceed to the steps provided below:
Step 1: You will start cutting a small portion on the corner of the film using a razor blade. Do not worry about scratching your car window; it will not happen as long as you always keep in mind gently cutting the film.
Step 2: Right after cutting the corner area of the film, slowly peel the window tint. By peeling it slowly, you can take the entire window tint in one go. If the film does not peel off all at once, you may use the razorblade as a guide to continue peeling off everything.
Step 3: As soon as you peeled off the old tint from your car window, you may now proceed by spraying soapy water mixture on the windows. You will not need the exact measurement for it – you only need to remember that the mixture needs to be buttery enough to expose the adhesive.
Step 4: Once you have already sprayed the entire car window with enough soap mixture, set enough time for the soap mixture to soak to soften the adhesive. In that way, it would be easier for you to remove the glue.
Step 5: This step is already the time to scrape off the adhesive residue from the glass. Remember to scrape them off to avoid scratching the glass gently. Repeat the process until there are no more adhesive residues left on the car window.
Step 6: After removing the residue left from the car window, the final step is to clean the window using a glass cleaner and a cloth. You can use a dishwashing soap and water mixture as an alternative for glass cleaner. Do not use ammonia-based cleaners as they will cause damage to the car window.
It is easy to remove old tints. You are preparing your vehicle for a fresh coat of window tint by doing this. It would be best if you were careful not to scratch your windows. It will ensure that your next window tints look just as perfect.
KEPLER Window Films Coatings can provide new coatings for your window tinting in Rochester, MN. This window tinting company employs professionals and experts who provide you with the best products and services like auto window tinting in Camarillo.
To know more about KEPLER, you can visit their website at www.kepler-dealer.com.
